Chapter 90 (1/2)

If I’ht as well be a good item

Now that I’ long bows

That said, bows aren’t all that different, and yesterday I got to personally take and study the forress faster than if I werea staff

Anyway, I took several of the worst quality wood from the forest area closest to Faust to use for practice The wood fro for the real deal is way too scarce for me to take, so since I have one shot hatever amount I have on hand, it’s necessary to practice to draw up the blueprint s

First I’ll do it roughly

Of course the quality is 1 or 2, but right now my main priority is just to ardless

I intended to spend all of today’s login ti part, but

After around 30 , quality 4, once in a while 5, beganan appearance

With the quality becoood, I compared it to the screenshots of Ayame-san’s bow from yesterday and adjusted the shape and balance

In another 30 , I soboith quality 7

Longbow

Atk+18

Quality 7

As expected of longbow; the firepower is alreadymade froeness h

Alright, let’s leave that there; so I don’t forget the feel, let’s try andthat

“U that bow?”

That voice called out toa boas there

“My bad, but this longboas just bow that only has Atk 18 You’d be better off buying the longbows already out on the market”

When I said that, “I see, sorry for bothering you,” he took his leave

So there are people who go directly to the crafting stations to buy stuff… Hoping to get a discount before it gets put out on the street stalls …?

Thinking that it doesn’t an production again

Next I interpose some hard wood on hand that I haven’t used up fro the co various wood that I hout the bow family

Shaving it done, polishi+ng the joints, form it into the shape of a bow … I experienced the frustration in the past, sothat is firmly inputted into my head and hands

Prototype Cobow

Atk+26

Quality 6

Fuboas insufficient, so i it caused the quality to drop, huh? But, if I focus on this and get it to quality 8, then it ht stack up to Atk +30, I bet Coo to sleep today, so I’ll continue tomorrow

And so, the next day

Going out to the forest and gettingon all the fine details of the Prototype Cobow I made yesterday in order to raise the quality

I reinforced the joints, reviewed the balance, and revised the bow’s overall forain

Prototype Cobow

Atk

(adsbygoogle = adsbygoogle || [])push({});

+30

Quality 8

Alright! I uts! Pose With this I can finally move on to the next step That next step is to hollow out 2 ellipse-shaped grooves in the front of the bow

The upper half of these elliptically-shaped grooves are so I can attack 2 pieces of Light Metal by e the bow, I can

Of course the a it is less so the effectiveness will probably fall, but I will do the best I can with the aht Metal I have

After texturing the grooves, in order to rooves, and to test the union of the two, I head over to the Forge and toss in e to soften it

There I pour it into a mold; it waslike a pole

I can’t afford to fail; I don’t have anymore materials, after all

After some time I check to make sure it’s hardened

Taking it out of the rooves in the coht with me

There’s soaps so I hammer it flush, inset it, supported the joints with steel all up and down, and spacing it out, arranged the steel to reinforce the joints, wound thin steel wires tightly around it as reinforcerip for the bow