24 Episode 23 Cane and Sword (1/2)

After receiving his approval, I cooled the metal lizard metal with water magic, stored it in the item box, and returned to the workshop. --Incidentally, the shape of the metal did not change even after being cooled rapidly.

I heard that a single armor plate would be enough for the material, but I couldn't cut it directly, so I left it with him.

I was asked what I should do with the leftover metal lizard metal, but I heard that it was difficult to manage, so I decided to buy it.

He said that he would remove the magic from one piece at a time and store the remainder in a container that does not allow magic to pass through.

If you are storing them for a short period of time, you don't need to go that far, as long as they don't come in contact with creatures with magic power such as humans, magic tools, magic stones, or other metals with high magic density.

The structure of the equipment will be decided after the removal of magic power. In the meantime, I need to get a wand.

I'm going to try to talk to Sumisa, who was already awake, about the wand I want. ......

Hello, Smitha, I need a wand.

You're Kaede, right?　I don't remember you, but I heard you saved me. Thanks. 　So what kind of cane do you want?

I want a wand that's about 20 centimeters long, strong, and can accelerate magic like a normal wand.

You can't have a wand that's not long enough to accelerate magic like a long wand.　Do you even know how a wand works?

”You can't do that. ”No, you don't.

”You don't understand. What's ......?

”I'm only going to explain this once, so listen up. The structure of a cane is .......

The explanation is as follows.

First of all, a wand can be divided into four parts: the magic collection part, the acceleration part, the release part, and the outer shell.

The wand is divided into four parts: the magic collection part, the acceleration part, the release part, and the outer shell. The magic collection part is, as the name implies, the part that collects magic power.

The magic power is collected by passing a thin copper rod through the wood used to make the wand.

The collected magic power is then released near the base of the wand, on one side of the acceleration part.

It does not have to be copper, but copper is used because it is cheaper.

The accelerator is a part that collects the magic power released from the magic collector and accelerates it.

It is made by covering an iron rod of about 1cm in diameter with copper, gold, or some other metal.

The acceleration power of the wand changes to some extent depending on the material of the metal coating.

It is said that if magic power is stored in the coating when the wand is made, it will produce acceleration force. I don't know why.

It is also said that magic does not move between different metals unless it exceeds the allowable amount, and even if it exceeds the allowable amount, the speed of movement is much slower than the acceleration, so it has little effect on the magic that passes through the core.

The tools used to process metal lizard metal are also made based on this principle, and several of them are stocked with metal lizard metal that has been drained of its magic power.

If you store too much magic power, it will only increase the acceleration power for a little while, but the excess magic power will be dissipated, so it is meaningless. The reason why the acceleration power differs depending on the coating is because the amount of magic power that can be stored is different.

There is no difference in the material of the core, but the core is made of iron for processing and strength reasons.

The release part is the part that releases the magic power, and it is made of the same metal as the core, crushed and powdered, mixed with clay, and baked.

It is said that the magic power pushed into the release part is pushed out by the magic power coming from behind, and is released with momentum.

Incidentally, the released magic power moves around the user at a high speed if no instructions are given, so the user does not need to use the tip of the wand to cast accelerated magic.

The outer shell is mainly made of wood, but this is simply because of the combination of strength and weight, and if you are fighting or marching for a certain length of time, holding something heavy will slow you down or make you lose concentration due to fatigue. Unlike my walking stick, a normal walking stick is long, and depending on the length of the stick, it can be quite heavy.

However, if the cane is bent too much, the acceleration part of the cane will not work, so lightness is not always enough.

In other words, if your wand is short and you only hold it in your hand during battle because of the item box, it should be sturdy.

However, my case is different from the norm, so there is no need to stick to this principle. My magic power and fighting style are completely different from those of other wizards. I'm going to suggest that.

”Okay, let's make a very long staff that can accelerate magic and can also be used as a sword!

”I don't know what you're talking about.

You're right. If someone had said the same thing to me in the same situation, I would have thought he was out of his mind.

But I'm very serious. I'm f*cking serious.

”Let me explain, I have a lot of magic power and I can cast spells while fighting with a sword, so it's possible.

”That's not an explanation.

That's not an explanation.” - Oh, shit, I skimmed too much. You're right, it's not clear.

I'll explain it from the beginning. First of all, the acceleration of magic power by the wand increases with the amount of magic power in the coating, right?　If the amount of magic in the coating exceeds the magic allowance of the metal, the acceleration will increase for that period of time.

”Yes, a wand that's freshly charged with magic will have a higher acceleration rate. In five minutes it will be almost as good as the old one, but it will be a little more powerful.

I wonder if the power is due to the fact that some of the magic released from the coating enters the acceleration part.

”So the magic in the coating can be used to accelerate for a certain amount of time. And by using other metals on the outside of the coating, you can slow down the dissipation of the magic power.