Chapter 214 (2/2)
Time flies!
A month passed in the blink of an eye!
Technology 9.
Assembly workshop.
Liu Chi looked at the super large five axis linkage machine tool, which had just been assembled and covered an area of more than 150 square meters, and his blood began to surge.
Even Chen Luguang's eyes on the side burst out greedy rays.
Super large five axis linkage machining center.
Who doesn't want it!
Now Europe and the United States do not show you such super artifacts, let alone buy them.
The three swordsmen also kept rubbing their hands on the side, pressing the excited mood in their hearts.
This big guy
I also have a credit.
For this big guy, Seiko was half shut down. For this big guy, five jg0002 machine tools (medium-sized five axis machining centers) were pulled over.
Old Zhang also waited quietly for eight hours.
”Try the machine.” Liu Chi took a deep breath, calmed himself down and said to Zhou Meng behind him, ”girl, give me the drive system.”
”Yes!” Zhou Meng handed over the USB flash disk in his hand.
Liu Lin took the USB flash drive, inserted it into the USB interface, pulled out the keyboard on the console and made a sound.
Import!
Install!!
Three minutes later, the program is installed!
A group of people are waiting quietly.
After Liu Chi confirmed that there was no problem, he directly pressed the start button.
”Pa”
”Weng...” a faint voice came out of the workbench.
Very quiet!
”Zhou Meng, you copy the data of A28 accessories.” Liu Chi emptied the position of the console and said to the Sanji friend on the opposite side, ”come and help me put the blank material on the workbench.”
......
After five minutes of tossing, Liu Chi directly buckled the glass cover of the workbench and said to Zhou Meng, who was already on the console, ”you can start.”
”OK.” Zhou Meng answered and pressed the run key.
A group of people gathered directly in front of the glass cover, watched the high-speed rotation of the knife Weng Weng, the iron cutting flying, and prayed secretly in their hearts!
Sure!
No one left halfway.
After 35 minutes, the tool stopped working!
Liu Chi took out the parts, put in the same blank and started again.
”First measure out the detailed data of this accessory.” Liu Chi said to Zhou Meng, ”girl, please bring me the excitement measurement tools.”
”Chen Song, help you measure the R-bit data.”
”Yunhao, the accuracy of your center position.”
“......”
”Haiqing, look at the console. When the workbench is finished, put another one on it.”
”Zhou Meng, you record.”
“......”
Maximum working area: 12000x8000;
Table size (length) × (W) 15000x9000;
Maximum load of workbench (kg): 10000;
......
Bits a to B: 158.5648mm
Position s to F: 1586.3256mm
R15 hole diameter: 156.2590mm
......
In an hour!
Liu Chi took the information recorded by Zhou Meng in his hand and looked at it for a while, frowning.
”How's it going?” Chen Song asked anxiously.
”Fail to meet the design requirements.” Liu Chi shook his head.
”What is the precision?” Old Zhang couldn't help it.
”X, y and Z positioning accuracy: 1.25um, x, y and Z repeated positioning accuracy: 2.88um.”
”It's a little far away.” As soon as Xiao Yunhao stretched out his hand, he took the recording paper in Liu Chi's hand and glanced at it for several times.
”Remove.” Liu Chi thought for a moment and said directly.
”Liu Chi will do it tomorrow. You don't want to eat. Others want to eat.” Ye Yuxin is busy holding Liu Chi who is ready to work.
Don't look at the time!
It's getting dark. I don't know. Pay attention.
”Er......” Liu Chi was stunned and looked at the night outside.
”Yes, Liu Chi ate first. It's already more than 7 o'clock.” Chen Luguang quickly came to support.
Mr. Zhang has been waiting all day. You don't eat, and you won't let others eat?
”Xiao Liu, you've been busy all day. You're not in a hurry. You're not hungry this evening. I'm an old man. Let's go to dinner first.” Old Zhang opened his mouth.
“......”
”OK, then eat first and check the problem tomorrow. It's a little far away.” Liu Chi is a little unwilling to say.
The next morning!
A group of people report on time!
After hours of tossing.
Nothing.
”Shouldn't it?” Liu Chi was a little confused. He frowned and said, ”what's the problem?”
”No, try processing another part and see the situation!” Li Haiqing picked up the towel and wiped the oil in his hand, which was also a little helpless.
Four hours later!
”That's it for today. Eat.” Liu Chi looked at the seven or eight accessories that had just been processed and shook his head. Now it's more than 17 o'clock.
”Old Zhang, please arrange someone to come over. I can't find a problem for the time being.”
”OK, I'll contact you right away.” In fact, Mr. Zhang is in a hurry these two days!
However, because of Liu Chi's relationship, it's really inconvenient for him to speak. Now Liu Chi speaks, it's not a problem.
In fact, when Liu Chi was building a super large five axis machining center, it had been staring at it!
Old Zhang went out in person and ”monitored” the scene!
With Liu Lin's consent and Mr. Zhang's notice, a group of experts composed of more than a dozen people prepared early went straight to No. 9 technology.
After that, the expert group directly settled in No. 9 technology.
A group of bigwigs came, and Liu Chi completely reduced himself to a role of explanation;
After the explanation, there was nothing to do with Liu Chi after the meeting. Many of them were senior researchers, even people with special posts. Liu Chi didn't need to wait in front of and behind his horse!
Half a day passed in the blink of an eye.
”Mr. Guo, how are you? Have you found out what the problem is?” Liu Chi asked old Guo (head) who was staring at the drawing in a daze!
”I don't have any clue. If I can't, I can only use it first?” When old Guo heard Liu Lin's words, he came back and said to Liu Chi helplessly!
”Er...” Liu Chi scratched his head, turned his head and looked at the machine tool accessories scattered on the ground.
Now the accuracy of the design is enough for the country, so it is acceptable for the country to improve while using.