Chapter 229: Subsea Construction (1/2)

The following focuses on building the refinery in the mining area to achieve self-sufficiency in steel.

The production of the Mechanical Colossus Type I requires a lot of steel.

Ye Qing has already finished the five Mechanical Colossus Type X, and the construction of the mining area has been completed.

These five Mechanical Colossus Type X will become a thorough mining monster, together with the angry miners, will extract the entire mining area at the bottom.

The main plant of the refinery has been built.

It has been busy with the Mechanical Colossus Type I production line and has no time to manufacture refinery equipment.

It is now possible to start all work, as well as the reefs in the Longxitan Bay.

It is also necessary to clean up and build large docks.

With the sales of the Mechanical Colossus Type I, land transportation can't meet transportation needs.

Especially for those foreign customers, he can only export by sea.

When Ye Qing clears a waterway in the bay, the ocean freighter could drive straight here.

Clearing the reefs on the seabed, Ye Qing intends to let the Lord Chariot go out.

This kind of thing is quietly done at night, and it is still low-key during the day.

Taking advantage of leisure time, Ye Qing continued to look at the fourth stage of black technology in the monster factory to see if he could choose another one as the next development point.

[Gianli forging machine], [super hard alloy technology], [simulation flight technology], [full-motion assembly platform technology], [strong ionization industrial wastewater treatment technology].

These five kinds of black technology, strong ionization has been developed by Ye Qing but currently does not have the possibility of mass production, the giant forging machine is not just needed.

The simulation flight technology also did not find any practical value.

Ye Qing could not build a mechanical bird to be a toy.

Before energy breakthroughs, propellers and jet engines will always be the best flight power.

The full-motion assembly platform is a piece of fully automatic production equipment that integrates the production function of the assembly line.

It is different from the huge body in the pipeline.

According to the size of the drawing, its volume is only the size of the container.

As long as the part is ready like a magazine, it can be fully automated and does not require any human intervention.

Its maximum manufacturable product size is two cubic meters, and one equipment is equal to a full load of a production line.

This can be included in the manufacturing plan.

At that time they can be responsible for the mechanical engineering chairs and the production of metal engraving machines to liberate the monsters on these two production lines.

But not too much can be built, and overcapacity often means waste.

Super hard alloy technology!

It is more suitable for making highly wear-resistant materials or protective materials.

Super-hard alloys, and nickel-titanium gold memory alloys, are all special alloys.

The properties of nickel-titanium gold memory alloys are soft and cannot be applied to some mechanical parts that require deformation resistance.

Super-hard alloy is the other extreme, and it is its nature that it is not bent.

Moreover, it can only be manufactured by powder metallurgy technology. When it is made, it is challenging to re-process it.

Ye Qing looked at its metal formula in the mobile phone of the monster factory.

Tungsten, cobalt, bismuth, titanium, nickel, five metal components, metal powder with a grain size of 0.1 microns is required for powder metallurgy.

Several metals are not too rare, it is a price issue.

However, the electric furnace that needs to be used for sintering is somewhat special and requires the monsters to make it themselves.

- Microwave sintering furnace!

The special frequency band microwave released by the magnetron is coupled with the fine metal structure in the material to generate heat.

Conventional electric furnace sintering, the appearance of the sintered parts and the internal temperature will be very different.

Which is caused by the uneven heat transfer, the general problem of sintering metal is not large, but it is not good for firing super hard alloy.