Part 6 (1/2)

_Proble

_Material_--One piece of basswood, 6-1/21-1/41/4 inches

One piece of sandpaper, 13-1/8 inches Glue Stain

On the wood place points three and a quarter inches from each end, at A and B, and connect them by line A-B Place points G and H half an inch froh I, and end at H In the rectangle A-B-F-E draw a handle as indicated in the diagra spaces G-C-I and H-D-I Sandpaper thoroughly

Shape one end of the 13-1/8-inch piece of sandpaper as curve G-I-H, and glue it to the wood Stain the wood and polish it by rubbing it with a soft cloth

[Illustration: PENCIL SHARPENER]

4 Match Scratch

_Proble

_Material_--One piece of basswood, 3-3/431/4 inches One piece of sandpaper, 2-1/23 inches Glue

[Illustration: MATCH SCRATCH]

Place a point at the center of line A-B and of line C-D Place a point on line A-C and line B-D, one and one-quarter inches from A and B

Connect these points by a pencil line, and draw another line one-eighth of an inch below Score these two lines with the point of the knife, hest point of the curve being half an inch froe A-E-B Draw curves G-F and H-F

Rees and sides

Shape the piece of sandpaper, two and a half by three inches, to fit the space G-F-H, allowing a quarter-inch lue it on Bore a hole at 5 Do not stain

[Illustration: KITE STRING WINDER]

5 Kite-String Winder

_Proble

_Material_--One piece of basswood, 5-1/22-1/21/4 inches

Measure and lay off as shown in the diagram, and cut out all spaces indicated by dotted lines Sandpaper the wood until it is smooth Stain the winder or not, as is preferred

6 There 62)

_Material_--One piece of basswood 631/4 inches Stain

For the thermometer back the measurements need be placed on but one side of the wood

Mark off a quarter-inch froe all around and draw a line Place a second line a quarter-inch within this Using the line nearest the edge as a guide, cut off the sharp edges on the face of the strip of wood until the slant surface is reached between the line and the back edge Thisthe design Originate a sin, and lay it off on the board in pencil Then, using the point of the knife, with the greatest care groove out the design Place a hole near the top of the strip by n fits around the hole

Sandpaper, stain, and polish the wood

The design given here is the siested that until the child becorooving had better be confined to straight lines Con a vertical, a horizontal, and an oblique line, and soinated