Chapter 229: Subsea Construction (1/2)

The following focuses on building the refinery in thearea to achieve self-sufficiency in steel

The production of the Mechanical Colossus Type I requires a lot of steel

Ye Qing has already finished the five Mechanical Colossus Type X, and the construction of thearea has been completed

These five Mechanical Colossus Type X will becoryarea at the bottom

The main plant of the refinery has been built

It has been busy with the Mechanical Colossus Type I production line and has no time to manufacture refinery equipment

It is now possible to start all work, as well as the reefs in the Longxitan Bay

It is also necessary to clean up and build large docks

With the sales of the Mechanical Colossus Type I, land transportation can't meet transportation needs

Especially for those foreign custo clears a ay in the bay, the ocean freighter could drive straight here

Clearing the reefs on the seabed, Ye Qing intends to let the Lord Chariot go out

This kind of thing is quietly done at night, and it is still low-key during the day

Taking advantage of leisure tie of black technology in the monster factory to see if he could choose another one as the next develop ht technology], [full- ionization industrial ater treaty]

These five kinds of black technology, strong ionization has been developed by Ye Qing but currently does not have the possibility ofht technology also did not find any practical value

Ye Qing could not build a y breakthroughs, propellers and jet engines will always be the best flight power

The full-motion assembly platform is a piece of fully autorates the production function of the assee body in the pipeline

According to the size of the drawing, its volu as the part is ready like a azine, it can be fully automated and does not require any human intervention

Its maximum manufacturable product size is two cubic meters, and one equipment is equal to a full load of a production line

This can be included in theplan

At that ti chairs and the production ofmachines to liberate the monsters on these two production lines

But not too much can be built, and overcapacity often y!

It is hly wear-resistant materials or protective materials

Super-hard alloys, and nickel-titaniuold memory alloys, are all special alloys

The properties of nickel-titaniuold memory alloys are soft and cannot be applied to some mechanical parts that require deformation resistance

Super-hard alloy is the other extreme, and it is its nature that it is not bent

Moreover, it can only be y When it islooked at its metal formula in the sten, cobalt, bismuth, titaniurain size of 01 y

Several metals are not too rare, it is a price issue

However, the electric furnace that needs to be used for sintering is somewhat special and requires the monsters tofurnace!

The special frequency band netron is coupled with the fine enerate heat

Conventional electric furnace sintering, the appearance of the sintered parts and the internal temperature will be very different

Which is caused by the uneven heat transfer, the general probleood for firing super hard alloy

Microwave sintering furnaces do not have this probleenerated by them can be distributed very evenly inside and outside the sintered part