Chapter 12 (1/2)

In the end, I have given up on going to the guild today as well.

Today, I intend to strike the j.a.panese heart, the man’s romance, a katana. Although I say strike, the level of my smithing and alchemy is high. Therefore, most things will be done with that, so I won’t be striking too much.

In the workshop, I drill 2% of Mithril and 0.6% of carbon alloy into the Orichalc.u.m.

When doing alchemy, there are parts dependent on imagination, but an Orichalc.u.m alloy with a h.o.m.ogeneous structure is completed.

This hard metal will be used as the edge and sheath metal.

I further make an alloy with increased Mithril and a slightly reduced amount of carbon, producing a tenacious toughness.

I will use this for the blade ridge and back metals.

I combine the material formed by molding magic with the fillers.

Here, I would heat the magical power furnace and stretch it into the form, but I use earth magic and strike the hammer while regulating the metal structures.

Using molding magic and polish magic, I adjust the form.

Thin on the edge side and thickly quenched on the back side. Here, I use earth magic again and temper the crystal structure of Orichalc.u.m alloy on the edge.

I temper it at low temperatures and make final adjustments with Molding and Polish.

A dragon coils around the blade and a carving of Kurihara is about to swallow the sword tip.

At this moment, I felt as if a sacred flame dwelled inside the blade.

I use Evil Treant wood and make a hilt and a scabbard. I use the wyvern’s patagium like a sharkskin leather on the hilt and coil the hilt wrap around it. I made the hilt wrap by twisting spider silk and mithril thread together.

I made the scabbard from the leather of the rare black wyvern.

I make the guard with an adamantine alloy. I referring to Musas.h.i.+’s sword’s crescent guard when making it. In short, I copied it.

I insert a collar and reinforce the tip of the scabbard with adamantine.

I place metal fittings on the scabbard so I could attach it to the sword belt.

・Kurikara’s Tachi

Grade Mythical

Automatic Repair

Durability Enhancement

Hardness Enhancement

Slas.h.i.+ng Attack Enhancement

Corrosion Resistance

Dark Attribute Special Attack

Light Attribute Enhancement

A Tachi with a blade length of 80cm was completed. There doesn’t seem to be any problems with balance.

I think it turned out quite well. Well, it won’t change the fact that the bardiche is going to be the main weapon.

「El! The equipment is done~!」

When I came to the living room, El was sleeping on the sofa.

「…… U, u~n, Kaito」

When I entered the room, El was just waking up.

「You have made all the equipment?」

El asks while half-asleep.

「Yeah, would you like to try it?」

When I ask, El enthusiastically smiles.

「Un! Un! I will try it on!」

We move to our room.

「Do I change in front of Kaito?」

El bashfully asks.

「You are asking that now?」

I put on pants, El miniskirt, and leggings under it, then we put on the under armor, leather armor, gauntlets, and boots.